Rolex GMT-Master 16750 Bracelets and End Links

New Aftermarket Bracelet Components for the Transitional GMT-Master, Manufactured by Oysters Jubilee

Oysters Jubilee manufactures NEW aftermarket Rolex GMT-Master 16750 bracelets and hollow end links for the reference that bridged vintage and modern GMT production. The 16750 introduced the sapphire crystal and Caliber 3075 quickset movement to the GMT-Master line while retaining full compatibility with Oyster and Jubilee bracelet configurations from the preceding 1675. We produce every 16750 bracelet component in hollow link construction, precision machined to 1980s-era specifications and ready for installation on your vintage GMT-Master. Verify Your 16750 Bracelet Fitment on the Compatibility Chart

What Makes the 16750 the Simplest GMT-Master to Restore

One Bracelet Era, Two Configurations, Zero Guesswork

Unlike the 1675 with its three construction eras spanning riveted, folded, and hollow links, the GMT-Master 16750 used hollow link bracelets exclusively throughout its entire 1980 to 1988 production run. That means every 16750 ever made accepts the same two bracelet configurations: Oyster reference 78360 with 580 hollow end links, or Jubilee reference 62510H with 550 hollow end links. No serial number research required. No period-matching complexity. You pick Oyster or Jubilee, and the correct bracelet and end link codes are settled.

Manufactured to Match Documented 1980s Specifications

We precision machine each 16750 bracelet component to match documented vintage dimensions from the hollow link production era. Tolerances follow period-correct geometry for 20mm lug width and drilled lug hole fitment, ensuring flush contact between end links and 16750 case lugs. Stainless steel 316L grade material is used throughout, from link bodies to clasp mechanisms.

Direct from Our Production Line at Manufacturer Pricing

Oysters Jubilee manufactures and sells directly, with no dealer chain between production and delivery. Every Rolex 16750 bracelet and end link ships new from our inventory at manufacturer-direct pricing without dealer markup.

Oyster Bracelet 78360 with 580 Hollow End Links for the 16750

The three-link Oyster bracelet reference 78360 delivers the classic tool-watch profile that most collectors associate with the GMT-Master line. On the 16750, this bracelet features hollow link construction with brushed finishing and a foldover clasp, matching the configuration used across the full 1980 to 1988 production span.

Three-Link Hollow Construction with Foldover Clasp

The 78360 uses flat center links flanked by rounded outer links in a brushed stainless steel finish. Hollow link construction keeps wrist weight balanced while providing the robust feel expected from a sport-category Rolex bracelet. Our manufactured version follows period-specific link geometry and clasp proportions based on documented vintage examples. Browse the full Oyster bracelet collection for additional compatible references.

Complete Oyster Assembly or Bracelet Body Only

We offer two purchasing paths for the 16750 Oyster configuration:

• 78360 with 580 end links as a complete assembly, ready for direct installation with end link fitment already verified
• 78360 bracelet body only for owners who already have correct 580 hollow end links from a previous bracelet or a shared GMT-Master collection

Buying the bracelet body separately reduces cost when your existing end links still deliver flush case fitment without gaps.

Jubilee Bracelet 62510H with 550 Hollow End Links for the 16750

The five-link Jubilee bracelet reference 62510H provides a dressier alternative to the Oyster, with greater wrist conformity and a polished center-link pattern that softens the 16750's sport-watch presence. The modern Rolex GMT-Master II on Jubilee bracelet traces its heritage directly to this 16750 configuration, making it a historically significant pairing for collectors who appreciate the lineage.

Five-Link D-Style Profile with Polished Center Links

The 62510H features D-shaped solid-sided links with three polished center links flanked by two brushed outer links per row. This finishing contrast defines the Jubilee aesthetic. Our manufacturing replicates the link profile, polishing pattern, and clasp geometry from documented vintage 62510H examples. The "50" stamp on the clasp interior indicates 20mm lug compatibility for GMT-Master and Submariner cases. Explore the full Jubilee bracelet collection for all available configurations.

Complete Jubilee Assembly or Bracelet Body Only

The same two purchasing paths apply:

• 62510H with 550 end links as a complete assembly for direct installation on any 16750 case
• 62510H bracelet body only for collectors who already own compatible 550 hollow end links

The 550 end links seat flush against 16750 case lugs with the tight transition that properly configured Jubilee installations require.

Hollow End Links, Extra Links, and Springbars for the GMT-Master 16750

Not every restoration calls for a complete bracelet. If your existing 78360 or 62510H is structurally sound but has worn or damaged end links, replacing just the end link pair restores proper case fitment at a fraction of complete bracelet cost.

Standalone End Links in 580 and 550 Codes

• 580 hollow end links for the Oyster 78360 bracelet, compatible with all 16750 production years
• 550 hollow end links for the Jubilee 62510H bracelet, also compatible with late-production 1675 cases

Both end link references use fat 2mm springbars and seat into the 16750's 20mm drilled lug holes. We manufacture each pair to match documented vintage end link geometry for gap-free fitment.

Extra Links, Half Links, and Springbars for Bracelet Sizing

Fine-tune your 16750 bracelet length with the correct sizing components:

1. Oyster extra links with polished sides for the 78360 bracelet
2. Jubilee extra links in D-style profile for the 62510H bracelet
3. Oyster half links (long tube and short tube) for micro-adjustment on the 78360
4. Fat springbars in 2mm x 20mm dimensions for secure end link attachment to 16750 drilled lugs

Every sizing component ships NEW and matches the construction type of its parent bracelet reference.

Which Bracelet Fits Your Rolex 16750

Component selection for the 16750 comes down to one decision: Oyster or Jubilee. Every 16750 case produced between 1980 and 1988 shares identical 20mm lug width, drilled lug holes, and case geometry.

16750 Bracelet and End Link Quick Reference

1. Oyster configuration: Bracelet 78360 with 580 hollow end links, foldover clasp, 20mm lug width
2. Jubilee configuration: Bracelet 62510H with 550 hollow end links, foldover clasp, 20mm lug width
3. Springbar specification: 2mm diameter fat springbars for all 16750 cases

The 16750 is the only GMT-Master reference where every watch produced accepts the exact same bracelet and end link codes.

Confirm Fitment with the Rolex Compatibility Chart

While the 16750 keeps things straightforward, verifying your case reference before ordering protects against misidentification. Some sellers mislabel 1675 or 16700 cases as 16750 references. Check between the lugs at 12 o'clock for the stamped reference number, then confirm against our chart. Check the Rolex Compatibility Chart

Bracelets for Related GMT-Master and Submariner References

Because the 16750 ran during the standardized hollow-link era, its bracelet codes interchange with several adjacent Rolex sport references. Useful when restoring multiple watches from the same period.

GMT-Master 1675 Bracelets and End Links

The 1675 preceded the 16750 and spans three bracelet construction eras from 1959 through 1980. Late-production 1675 cases accept the same 78360 and 62510H bracelets with 580 and 550 end links as the 16750. Browse GMT-Master 1675 bracelets and end links for the full range including folded link configurations.

GMT-Master 16700 Bracelets and End Links

The 16700 succeeded the 16750 and retained the same bracelet bodies while shifting to updated 501B and 502B end link codes. If you own both references, the 78360 and 62510H bracelet bodies interchange, but end links do not. Shop GMT-Master 16700 components for reference-specific end links.

GMT-Master II 16710 and 16760 Components

Both GMT-Master II references use the 78360 Oyster bracelet with 501B end links. The 16760 "Fat Lady" overlapped with the 16750 in production from 1983 to 1988, sharing case dimensions but using different end link profiles. Explore GMT-Master II bracelets for 16710 and 16760 configurations.

Submariner 1680 and 16800 Compatible Bracelets

The Submariner 1680 and 16800 share 580 end links with the 16750, and both accept the 78360 Oyster bracelet. Collectors restoring both a GMT-Master and a Submariner can source shared components from a single manufacturer. Browse Submariner bracelets for model-specific details. Browse the Full GMT-Master Bracelet Collection

Restore Your GMT-Master 16750 with the Right Configuration

Oysters Jubilee manufactures every Rolex GMT-Master 16750 bracelet and hollow end link configuration in our product line. Oyster or Jubilee, complete assembly or individual components, every part ships NEW at direct manufacturer pricing. One reference, one era, two bracelet options, zero compatibility complexity. View the Rolex Compatibility Chart